Evaluasi Metode Analisis Kadar Asam Laktat pada Sabun Cair Menggunakan Kromatografi Cair Kinerja Ultra
Date
2026Jenis/Type
Tugas AkhirSubtype
Undergraduate ThesesAuthor
Jundi, Rafid
Ramdhan, Mohamad Alief
Metadata
Show full item recordAbstract
Sabun cair memiliki komponen bahan aktif kimia yang tidak hanya sekedar
surfaktan sebagai bahan utamanya, melainkan dilengkapi dengan bahan-bahan aktif
seperti asam laktat yang berfungsi sebagai pengatur keasaman atau pH untuk
meningkatkan stabilitas produk sabun cair. Penelitian ini bertujuan untuk
mengevaluasi metode analisis asam laktat pada sabun cair menggunakan KCKU
berdasarkan parameter validasi. Preparasi sampel dilakukan melalui sonikasi
dengan pelarut fase gerak buffer fosfat. Validasi meliputi uji kesesuaian sistem,
spesifisitas, linearitas, LOD, LOQ, akurasi, presisi, dan robustness. Hasil analisis
spesifisitas menunjukkan tidak terdapat puncak asam laktat pada blanko/placebo,
nilai %RSD pada kesesuaian sistem sebesar 0,04%-0,13%, robustness sampel
sebesar 0,01%, dan presisi sebesar 1,06% yang memenuhi kriteria =2. Linearitas
ditunjukkan pada koefisien korelasi 0,9992 pada rentang 0- 140% b/b. Nilai
recovery sebesar 98-101% memenuhi kriteria AOAC. Metode dinyatakan valid
dan layak digunakan. Liquid soap has a component of chemical active ingredients that are not
just surfactants as the main ingredient, but are equipped with active ingredients such
as lactic acid which functions as an acidity or pH regulator to increase the stability
of liquid soap products. This study aims to evaluate the method of analysis of lactic
acid in liquid soap using KCKU based on validation parameters. Sample
preparation is carried out through sonication with phosphate buffer motion phase
solvent. Validation includes testing the suitability of the system, specificity,
linearity, LOD, LOQ, accuracy, precision, and robustness. The results of the
specificity analysis showed that there was no peak of lactic acid in the
blank/placebo, the %RSD value at the suitability of the system was 0.04%-0.13%,
the robustness of the sample was 0.01%, and the precision was 1.06% which met
the criteria =2. Linearity is shown at a correlation coefficient of 0.9992 in the range
of 0-140% b/b. The recovery value of 98-101% met the AOAC criteria. The
method is declared valid and suitable for use.
Collections
- UF - Chemistry Analysis [151]

