Karakterisasi Optik dan Listrik Film Ba0.55Sr0.45TiO3 untuk Aplikasi Sensor Kadar Gula Darah
dc.contributor.advisor | Irzaman | |
dc.contributor.advisor | Syafutra, Heriyanto | |
dc.contributor.author | Akbar, Hadyan | |
dc.date.accessioned | 2015-01-06T03:49:36Z | |
dc.date.available | 2015-01-06T03:49:36Z | |
dc.date.issued | 2014 | |
dc.identifier.uri | http://repository.ipb.ac.id/handle/123456789/72973 | |
dc.description.abstract | Ba0.55Sr0.45TiO3 films had been successfully deposited on the substrate of p-type Silicon (100) using Chemical Solution Deposition (CSD) and spin coating method with 3000 rpm rotation speed for 30 seconds and 1 M solubility. Thin film was annealed at temperature of 750 oC, 775 oC, 825 oC, 875 oC and 925 oC for 15 hours with rate of temperature rise 1.67 oC/minute. Optical test results showed the BST films can absorb visible light, so it can be used for non-invasive blood sugar level sensors. Analysis of the band gap energy performed using the Tauc Plot method results with the range of 2.843-3.169 eV. Electrical test results demonstrated the BST films are diodes. SEM results of BST films showed a non-homogeneous surface morphology. EDX results showed that the composition of the BST constituent is not fully in accordance with stoichiometry. | en |
dc.language.iso | id | |
dc.subject.ddc | Electrical properties | en |
dc.subject.ddc | Physics | en |
dc.title | Karakterisasi Optik dan Listrik Film Ba0.55Sr0.45TiO3 untuk Aplikasi Sensor Kadar Gula Darah | en |
dc.subject.keyword | Bogor Agricultural University (IPB) | en |
dc.subject.keyword | blood sugar level sensor | en |
dc.subject.keyword | optical properties | en |
dc.subject.keyword | electrical properties | en |
dc.subject.keyword | EDX | en |
dc.subject.keyword | BST | en |
Files in this item
This item appears in the following Collection(s)
-
UT - Physics [1080]