Pengembangan Kayu Lapis Berkualitas Tinggi yang Ramah Lingkungan
Development of High-Quality Plywood that is Friendly to the Environment
Abstract
NTRODUCTION : Efforts to improve the product (by product) plywood industry is necessary because of the high of waste plywood industry in Indonesia. One of them with the manufacture of plywood made from pieces of plywood edge. Utilization of waste as raw material for plywood is one alternative to solving the problem of raw material shortage of high quality wood and can add value-added industrial plywood. Creative and innovative research on the use of waste as raw material for plywood manufacture of high quality plywood is a very good effort in order to overcome the shortage of raw materials and can suppress the negative impact caused by waste wood. MATERIALS AND METHOD: Raw materials used in this research is a waste of pieces of plywood and pieces of plywood type of white meranti. Manufacture of plywood is done by taping the core perpendicular to the face and back with the addition of urea formaldehyde adhesive weight of 150 g/m2, 175 g/m2, 200 g/m2. Tests conducted physical properties include density, moisture content, water absorption and thickness development. While the mechanical properties of the tests include the MOE, MOR and internal bond RESULTS : Value of the average moisture content of plywood ranged from 12.76% to 13,12%, Value berisar density plywood between 0,54 g / cm ³ up to 0,58 g / cm ³. Based on the results of the testing that has been done can be concluded that the levels of the adhesive with a weight 150 g/m2, 175 g/m2, 200 g/m2 is used in this study produces plywood that has physical and mechanical properties are not significantly different. Upaya untuk meningkatkan produk sampingan (by product) industri kayu lapis diperlukan karena tingginya limbah industri kayu lapis di Indonesia. Salah satunya dengan pembuatan kayu lapis yang terbuat dari potongan-potongan pinggir kayu lapis. Pemanfaatan limbah sebagai bahan baku kayu lapis merupakan salah satu alternatif pemecah masalah kekurangan bahan baku kayu berkualitas tinggi dan dapat menambah nilai tambah industri kayu lapis. Penelitian kreatif dan inovatif tentang pemanfaatan limbah kayu lapis sebagai bahan baku pembuatan kayu lapis berkualitas tinggi merupakan usaha yang sangat baik dalam rangka mengatasi kekurangan bahan baku serta dapat menekan dampak negatif yang ditimbulkan oleh limbah kayu. Bahan baku yang digunakan dalam penelitian ini adalah limbah kayu lapis dari potongan-potongan kayu lapis berjenis meranti putih. Pembuatan kayu lapis ini dilakukan dengan merekatkan bagian core tegak lurus terhadap face dan back dengan tambahan perekat urea formaldehida berat labur sebanyak 150 g/m2, 175 g/m2, 200 g/m2. Pengujian sifat fisis yang dilakukan antara lain adalah kerapatan, kadar air, daya serap air dan pengembangan tebal. Sedangkan sifat mekanis yang di uji antara lain adalah MOE, MOR dan Internal bond. Nilai kadar air rata-rata kayu lapis berkisar antara 12,76 % hingga 13.12%, nilai kerapatan kayu lapis berisar antara 0.54 g/cm³ hingga 0.58 g/cm³. Berdasarkan dari hasil pengujian yang telah dilakukan dapat disimpulkan bahwa kadar perekat dengan berat labur 150 g/m2, 175 g/m2, 200 g/m2 yang digunakan dalam penelitian ini menghasilkan kayu lapis yang mempunyai sifat fisis dan mekanis yang tidak berbeda nyata.
Collections
- UT - Forestry Products [2376]