| dc.contributor.advisor | Yusri, Doni | |
| dc.contributor.author | SEMBIRING, PETRISIA JILENTA | |
| dc.date.accessioned | 2026-07-20T03:41:33Z | |
| dc.date.available | 2026-07-20T03:41:33Z | |
| dc.date.issued | 2026 | |
| dc.identifier.uri | http://repository.ipb.ac.id/handle/123456789/175093 | |
| dc.description.abstract | Mesin CNC Plasma Cutting memiliki peran penting dalam proses produksi
fabrikasi logam di PT Panca Wahana Teknindo. Penelitian ini bertujuan untuk
mengukur efektivitas dan keandalan mesin menggunakan metode Overall
Equipment Effectiveness (OEE), Mean Time Between Failure (MTBF), Mean Time
To Repair (MTTR), dan Mean Down Time (MDT). Analisis dilakukan
menggunakan pendekatan Six Big Losses dan Root Cause Analysis untuk
mengidentifikasi penyebab kerugian dan kerusakan mesin. Hasil penelitian
menunjukkan nilai OEE tahunan sebesar 97,16% dengan availability 90,58%,
performance 109,49%, dan quality yield 97,81%. Kerugian dominan yang
ditemukan yaitu breakdown losses, reduced speed losses, dan process defect losses
yang disebabkan oleh belum optimalnya inspeksi harian, pencatan checksheet,
autonomous maintenance, dan preventive maintenance. Dengan demikian,
Penerapan Total Productive Maintenance diharapkan dapat meningkatkan
keandanlan dan efektivitas operasional mesin CNC Plasma Cutting. | |
| dc.description.abstract | The CNC Plasma Cutting machine has an improtant role in metal fabrication
production process at PT Panca Wahana Teknindo. This study aims to measure the
effectiveness and reliability of the machine using the Overall Equipment
Effectiveness (OEE), Mean Time Between Failure (MTBF), Mean Time To Repair
(MTTR), and Mean Down Time (MDT) methods. The analysis was conduted using
the Six Big Losses and Root Cause Analysis approaches to identify the causes of
losses and machine failures. The results showed that the annual OEE value was
97.16%, with availability of 90.58%, performance of 109.49%, and quality yield of
97.81%. The dominant losses found were breakdown losses, reduced speed losses,
and process defect losses caused by suboptimal daily inspections, checksheet
recording, autonomous maintenance, and preventive maintenance. Therefore, the
implementation of Total Productive Maintenance is ecpected to improve the
reliability and operational effectiveness of the CNC Plasma Cutting machine. | |
| dc.description.sponsorship | | |
| dc.language.iso | id | |
| dc.publisher | IPB University | id |
| dc.title | Penerapan Total Productive Maintenance untuk Meningkatkan Efektivitas Mesin CNC Plasma Cutting di PT Panca Wahana Teknindo | id |
| dc.title.alternative | Implementation of Total Productive Maintenance to Increase the Effectiveness of CNC Plasma Cutting Machines at PT Panca Wahana Teknindo | |
| dc.type | Tugas Akhir | |
| dc.subject.keyword | CNC Plasma Cutting | id |
| dc.subject.keyword | Overall equipment effectiveness | id |
| dc.subject.keyword | preventive maintenance | id |
| dc.subject.keyword | Six big losses | id |
| dc.subject.keyword | Total productive maintenance | id |
| dc.subtype | Undergraduate Theses | |
