dc.description.abstract | Metode bola jatuh hukum Stokes merupakan salah satu metode yang
digunakan dalam pengukuran viskositas fluida. Metode bola jatuh hukum Stokes
digunakan pada praktikum penentuan koefisien viskositas fluida Mata Kuliah
Fisika Sains dan Teknologi PKU IPB. Parameter krusial metode bola jatuh hukum
Stokes adalah waktu, sedangkan pengukuran waktu pada praktikum penentuan
koefisien viskositas fluida masih dilakukan secara manual menggunakan stopwatch
yang menyebabkan kurang akuratnya nilai waktu yang dihasilkan. Sehingga perlu
dilakukan studi awal perancangan alat pengukur viskositas menggunakan sensor
LDR dan LED. Hasil yang didapatkan menunjukkan nilai viskositas tidak berbeda
secara signifikan, nilai viskositas fluida yang dihasilkan dalam percobaan sebagai
berikut: air objek 1 (0,36 ± 0.02), air objek 2 (0,083 ± 0.007), air objek 3 (0,06 ±
0.02), air objek 4 (0,023 ± 0.001), oli objek 1 (0,82 ± 0.02), oli objek 2 (1,3 ±
0.3), oli objek 3 (1,32 ± 0.04), oli objek 4 (1,27 ± 0.02), minyak objek 1 (0,5 ±
0.03), minyak objek 2 (0,66 ± 0.04), minyak objek 3 (0,52 ± 0.01), minyak objek
4 (0,4 ± 0.03), gliserin objek 1 (0,81 ± 0.02), gliserin objek 2 (1,5 ± 0.1), gliserin
objek 3 (1,4 ± 0.2), gliserin objek 4 (1,5 ± 0.2), sehingga Alat pengukur viskositas
menggunakan sensor LDR dan LED dengan metode bola jatuh hukum Stokes
direkomendasikan sebagai alat bantu praktikum penentuan koefisien viskositas
fluida Mata Kuliah Fisika Sains dan Teknologi PKU IPB. | id |
dc.description.abstract | The Stokes law of ball fall method is one of the methods used in the
measurement of fluid viscosity. Stokes's law of ball fall method has been done on
the practice of determining the fluid viscosity coefficient of the University of
Physics Science and Technology PKU IPB. The crucial parameter of the Stokes law
ball fall method is time, while the measurement of time on the practice of
determining the fluid viscosity coefficient is still done manually using a stopwatch
which causes less accuracy of the time value generated. Therefore, a preliminary
study of the design of viscosity measuring devices using LDR and LED sensors
should be carried out. The obtained results showed that the viscosity values did not
differ significantly, the values of fluid viscosity produced in the experiment as
follows: water 1 object (0,36±0.02), water 2 object (0,083±0.007), water 3 object
(0,06±0,02), water 4 subject (0,0023±0,001), object 1 fried oil (0,82±0.02), object
2 fried oil (1,3±0.3), object 3 fried oil (1,32±0.04), object 4 fried oil (1,27±0.01),
object 1 oil (0,5±01.03), object 2 oil (0,66±0,04), object 3 oil (0,52±0,01), subject
4 oil (0,54±0.093), object 1 glycerin (0,81±02.02), object 2 glycerin (1,5±0.1),
object 3 glycerin (1,4±0,2), object 4 glycerin (1,5 ±0.2), thus the viscosity
measuring device using LDR and LED sensors with the ball falling method Stokes
law recommended as a practical aid tool for determining fluid viscosity coefficient
Eye School of Physics and Technology PKU IPB. | id |