Show simple item record

dc.contributor.advisorHermawan, Dede
dc.contributor.advisorKusumaningrum, Wida Banar
dc.contributor.authorAinunnisa, Rifia
dc.date.accessioned2021-09-08T06:02:17Z
dc.date.available2021-09-08T06:02:17Z
dc.date.issued2021-09
dc.identifier.urihttp://repository.ipb.ac.id/handle/123456789/109135
dc.description.abstractKarbonisasi merupakan suatu proses untuk mendapatkan produk arang dengan suhu tertentu umumnya menggunakan suhu rendah dibawah 400 ℃ untuk menghasilkan arang hidro dan suhu tinggi sekitar 600 ℃ untuk menghasilkan arang aktif. Tujuan penelitian ini adalah menganalisis pengaruh suhu dan waktu dari proses karbonisasi hidrotermal terhadap batang kenaf serta menghilangkan hemiselulosa pada batang kenaf dengan proses hidrotermal. Penelitian ini menggunakan proses karbonisasi hidrotermal pada batang kenaf dengan suhu 130 ℃, 150 ℃, 170 ℃ dengan waktu 3 jam, 4 jam, dan 5 jam. Hasil penelitian ini menunjukkan karbon terikat, daya jerap polutan, dan daya jerap iodin arang hidro batang kenaf meningkat seiring kenaikan suhu dan waktu dibandingkan kontrol batang kenaf. Arang hidro batang kenaf terbaik didapat pada suhu 170 ℃ dalam waktu 3 jam dikarenakan total daya jerap iodin yang paling tinggi. Karbonisasi hidrotermal terbukti mampu mengurangi kandungan hemiselulosa.id
dc.description.abstractCarbonization is a process to get charcoal products with a certain temperature generally using low temperatures below 400 ℃ to produce hydro charcoal and high temperatures around 600 ℃ to produce activated charcoal. The objective of this study was to analyze the effect of temperature and time from the hydrothermal carbonization process on kenaf stems and to remove hemicellulose from kenaf stems using a hydrothermal process. This study used a hydrothermal carbonization process on kenaf stems with temperatures of 130 ℃, 150 ℃, 170 ℃ with 3 hours, 4 hours, and 5 hours. The results of this study showed that the bound carbon, pollutant adsorption capacity, and iodine adsorption capacity of hydro charcoal kenaf stems increased with increasing temperature and time compared to control kenaf stems. The best kenaf stems hydro charcoal was obtained at a temperature of 170 ℃ within 3 hours due to the highest total iodine adsorption capacity. Hydrothermal carbonization is proven to be able to reduce the hemicellulose content.id
dc.language.isoidid
dc.publisherIPB Universityid
dc.titleKarakteristik Arang Hidro Batang Kenaf (Hibiscus cannabinus L.) Terkarbonisasi Hidrotermalid
dc.title.alternativeStem Characteristics of Kenaf (Hibiscus cannabinus L.) Hydrothermal Carbonizedid
dc.typeUndergraduate Thesisid
dc.subject.keywordArang hidroid
dc.subject.keywordbatang kenafid
dc.subject.keyworddaya jerapid
dc.subject.keywordkarbonisasi hidrotermalid
dc.subject.keywordAdsorption capacityid
dc.subject.keywordhydro charcoalid
dc.subject.keywordhydrothermal carbonizationid
dc.subject.keywordkenaf stemsid


Files in this item

Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record