Show simple item record

dc.contributor.advisorSantosa, Gunawan
dc.contributor.authorAlvera, Febby
dc.date.accessioned2021-07-26T13:09:21Z
dc.date.available2021-07-26T13:09:21Z
dc.date.issued2021
dc.identifier.urihttp://repository.ipb.ac.id/handle/123456789/107822
dc.description.abstractMetode bor merupakan metode tertutup sehingga udara yang berada di dalam wadah penampung tidak terhubung dengan udara luar. Ketika oleoresin keluar dari saluran getah maka akan menekan udara yang ada di dalam wadah penampung dan terjadi tekanan udara balik yang menghambat keluarnya getah. Penelitian ini menggunakan 5 perlakuan berbeda yaitu perlakuan A dengan metode bor dan penampung getah berupa mangkok plastik tertutup, perlakuan B dengan metode bor menggunakan pipa yang tidak dilubangi, perlakuan C berupa metode bor tanpa pipa, perlakuan D berupa metode bor menggunakan pipa yang telah dibuat 1 lubang, dan perlakuan E berupa metode bor menggunakan pipa yang telah dibuat 2 lubang. Hasil penelitian menunjukkan metode bor dengan pipa yang telah dibuat 2 lubang memberikan hasil yang paling tinggi. Sehingga penggunaan pipa yang dibuat 2 lubang dapat dijadikan solusi dalam penyadapan oleoresin pinus agar menghasilkan getah yang lebih banyak dibandingkan metode bor dengan pipa yang tidak dilubangi.id
dc.description.abstractThe drill method is a method of closing the air that is in the container not connected to the outside air. When oleoresin comes out of the sap channel, it will press on the container and air pressure will occur which inhibits the release of sap. This study used 5 different treatments, namely treatment A with a drill method and a sap reservoir in the form of a closed plastic bowl, B with a drill method using a pipe that is not perforated, treatment C in the form of a drill method without a pipe, treatment D in the form of a drill method using a pipe that has been made 1 hole, and treatment E in the form of a drill method using a pipe that has been made 2 holes. The results showed that the drill method with a pipe that had 2 holes made gave the highest results. So that the use of pipes made of 2 holes can be used as a solution in tapping pine oleoresin to produce more sap compared to the drill method with pipes that are not perforated.id
dc.language.isoidid
dc.publisherIPB Universityid
dc.titlePengaruh Pelubangan Pipa terhadap Produktivitas Oleoresin Pinus dengan Metode Borid
dc.title.alternativeThe effect of pipe perforation on the productivity of pine oleoresin using the drill methodid
dc.typeUndergraduate Thesisid
dc.subject.keywordairid
dc.subject.keyworddrill methodid
dc.subject.keywordpipe perforationid
dc.subject.keywordpresussureid
dc.subject.keywordproductivityid


Files in this item

Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record