Development of structural composite products made from bamboo Ih fundamental properties of laminated bamboo lumber

Abstract

This experiment explored the technical feasibility of using bamboo zephyr mat with pre-hot-pressed treatment for the manufacture of laminated bamboo lumber (LBL), which is similar in construction to that of laminated veneer lumber (LVL). Six LBL boards (made from four-ply bamboo zephyr mats) with approximate dimensions of 2 • 42 x 42 cm were fabricated using resorcinol-based adhesive. The experimental design involved three combinations of layered structures (types I, II, and III) and two LBL loading positions (H-beam and V-beam) during the bending test. These materials were then compared to ordinary LVL. Results indicated that the bending properties (moduli of rupture and elasticity) of LBL were comparable to those of LVL, but there was no significant effect on the physical and mechanical properties among the three types of LBL beam. Interestingly, orienting the glue line to the vertical direction (V-beam) could maximize the ultimate strength of the LBL. Key words Laminated bamboo lumber 9 Bamboo zephyr mat - Pre-hot-pressed. Bending properties