Analisis Kenyamanan Termal pada Musala Al Fath FATETA IPB Menggunakan Simulasi Software Ecotect Analysis
Abstract
Keadaan rumah ibadah khususnya musala seharusnya memiliki unsur kenyamanan. Ecotect Analysis merupakan suatu aplikasi berbasis analisis kenyamanan ruangan yang tentunya dapat menentukan kondisi termal pada suatu ruangan. Penelitian ini dilakukan untuk menentukan apakah kondisi aktual material yang diterapkan pada bangunan Musala Al Fath FATETA sudah efektif dalam menunjang kenyamanan termal dengan menggunakan simulasi software Ecotect Analysis. Penelitian dilakukan menggunakan data primer dan data sekunder yang dianalisis menggunakan software Ecotect Analysis guna menentukan material selubung bangunan. Hasil dari analisis simulasi ecotect Analysis kondisi eksisting diapat nilai MRT sebesar 29,9℃ dengan nilai PMV sebesar 1,9 dan PPD sebesar 38%. Pada simulasi kondisi rencana dengan penggantian bahan dasar atap berupa tanah liat dengan dinding timber clad masonry didapat nilai MRT sebesar 28℃ dengan nilai PMV sebesar 1,19 dan PPD sebesar 24%. Simulasi dengan penggantian atap dengan material tanah liat dan dinding berupa concrete block plaster didapat nilai MRT sebesar 28,3℃ dengan PMV sebesar 1,75 dan PPD sebesar 34,4%. Hasil simulasi menunjukkan tingkat seseorang yang tidak merasakan nyaman dalam ruang paling kecil ialah dengan penggantian material atap dengan bahan dasar tanah liat dan penggunaan timber clad masonry pada material dinding. The condition of the house of worship, especially the prayer room, should have an element of comfort. Ecotect Analysis is an application based on room comfort Analysis which of course can determine the thermal conditions in a room. This research was conducted to determine whether the actual conditions of the materials applied to the Musala Al Fath FATETA building were effective in supporting thermal comfort by using the Ecotect Analysis software simulation. The research was conducted using primary data and secondary data which were analyzed using Ecotect Analysis software to determine the building envelope material. The results of the simulation Analysis ecotect Analysis of the existing conditions, the MRT value is 29,2℃ with a PMV value of 1,9 and a PPD value of 38%. In the simulation of the condition of the plan by replacing the basic roofing material in the form of clay with masonry timber clad walls, the MRT value is 28℃ with a PMV value of 1,19 and a PPD of 24%. Simulation by replacing the roof with clay material and walls in the form of concrete block plaster, the MRT value is 28,3℃ with a PMV of 1,75 and a PPD of 34,4%. The simulation results show that the level of someone who doesn't feel comfortable in the smallest space is by replacing the roofing material with clay base material and using masonry timber clad on the wall material.