Desain Roda Tipe Trek Karet Bersirip untuk Traktor Tangan di Sawah Berlumpur dalam
Abstract
Sebagian besar persawahan di Indonesia memiliki lapisan lumpur yang dalam lebih dari 20 cm. Dalam kondisi ini, traktor roda dua yang dilengkapi alat traksi roda bersirip tidak dapat beroperasi dengan baik. Bahkan traktor dengan roda bersirip bisa terperangkap dan tidak bisa bergerak. Salah satu perbaikan yang bisa dilakukan adalah mengganti roda dengan roda tipe trek. Tujuan dari penelitian ini adalah mendesain dan membuat prototipe roda tipe trek karet bersirip untuk traktor tangan yang dioperasikan pada sawah berlumpur dalam. Roda trek dirancang agar dapat dibongkar pasang dengan mudah pada traktor dan bentuk roda trek dapat menyesuaikan dimensi traktor. Rancangan trek berbentuk segitiga memiliki komponen fungsional yaitu rangka, flens, roda penggerak, pengait, velg, roller, pengencang trek, track link, sirip, dan penahan trek. Hasil analisis struktural terhadap komponen penyusun trek memiliki hasil yang baik berdasarkan hasil simulasi stress dan displacement menggunakan aplikasi Solidwork 2016. Berdasarkan hasil rancangan, telah dibuat sebuah prototipe roda trek lalu dilakukan uji fungsional. Hasil uji fungsional menunjukkan bahwa seluruh komponen roda trek dapat bekerja sesuai dengan fungsinya. Untuk mengantisipasi agar tidak terjadi permasalahan pada saat pengoperasian roda trek dapat teratasi. Antisipasi tersebut dilakukan penambahan pembatas berupa besi plat pada sirip roda penggerak, agar pengait yang terletak pada track link dapat berjalan lurus pada jalurnya. Most rice fields in Indonesia have a layer of mud that is more than 20 cm deep. In this condition, the two wheel tractor equipped with finned wheel traction device cannot operate properly. Even tractors with finned wheels can become trapped and unable to move. One improvement that can be done is to replace the wheels with track-type wheels. The purpose of this research is to design and manufacture a prototype of a finned track link track type wheel for a hand tractor operated in deep muddy fields. The track wheels are designed to be easily disassembled on the tractor and the shape of the track wheels can match the dimensions of the tractor. The triangular track design has functional components namely frames, flanges, slim wheels, hooks, wheels, rollers, track fasteners, conveyors, fins and track holders. The results of the structural analysis of the components that make up the track have good results based on the results of stress and displacement simulations using the 2016 Solidwork application. Functional test results show that all components of the track wheels can work according to their functions. To anticipate that problems do not occur during the operation of the track wheels can be resolved. Anticipation is done by adding a barrier in the form of an iron plate on the fin of the slender wheel, so that the hook located on the conveyor can run straight on its path.