Please use this identifier to cite or link to this item:
http://repository.ipb.ac.id/handle/123456789/61687
Title: | Emisi Formaldehida Papan Komposit dari Limbah Kayu dan Karton Gelombang Menggunakan Perekat Campuran Melamine Formaldehyde (MF) dan Water Based Polymer Isocyanate (WBPI) |
Authors: | Massijaya, Muh. Yusram Kusumah, Sukma Surya Sarton, Ali |
Keywords: | Bogor Agricultural University (IPB) Water-Based Polymer Isocyanate (WBPI) Melamine Formaldehyde (MF) Formaldehyde Emission |
Issue Date: | 2012 |
Abstract: | Wood waste and cardboard is one of the raw materials that can be used as raw materials in the manufacture of composite products. Creative and innovative research has been done on the use of wood waste and cardboard to produce composite board that has excellent physical and mechanical properties (Massijaya and Hadi, 2005), but the emission of formaldehyde produced is still relatively high. The objective of this study was to determine the content of formaldehyde emission on wood waste composite board and corrugated cardboard which are bonded with an adhesive mixture of melamine formaldehyde (MF) and Water-Based Polymer Isocyanate (WBPI) at various contents of paraffin. Formaldehyde emission testing used a bottle method of WKI-Wilhelm Klaunitz Institute. The research referred to previous studies on composite board manufacturing from wood waste and corrugated board with the results of the best mechanically, and physical properties. The compositions of adhesive mixed between WBPI and MF were 0:1 and 1:4, with the contents of paraffin addition were 0%, 4%, and 8%. Based on the testing by the bottle method of WKI-Wilhelm Klaunitz Institute, the average value of emissions with the adhesive composition of WBPI: MF (0:1) was 5,54 mg/L, while the adhesive of WBPI: MF (1:4) was 3,25 mg/L. Mixing adhesive significantly decreased formaldehyde emissions of composite board, as well as mixing of adhesive, addition of paraffin significantly increased formaldehyde emissions of composite board. The values of the adhesive WBPI: MF (1:4) with paraffin contents of 0%, 4%, and 8% were 1.66; 1.77; 2.11 mg/L, while the adhesive WBPI: MF (0:1) with paraffin contents of 0%, 4%, and 8% were 2.92; 3.32; 3.51mg/L. The composition of adhesive WBPI: MF (1:4) produced the emission value of F** and the composition of adhesive WBPI of MF (0:1) produced an emission value of F*S at all addition levels of paraffin by the standard of JAS 2003. Based on SNI, adhesive WBPI: MF (1:4) produced an emission value of E1 at all addition levels of paraffin, and adhesive WBPI: MF (0:1) produced an emission value of E2 at all addition levels of paraffin. |
URI: | http://repository.ipb.ac.id/handle/123456789/61687 |
Appears in Collections: | UT - Forestry Products |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
BAB I Pendahuluan.pdf Restricted Access | BAB I | 299.08 kB | Adobe PDF | View/Open |
BAB II Tinjauan Pustaka.pdf Restricted Access | BAB II | 322.59 kB | Adobe PDF | View/Open |
BAB III Metodologi Penelitian.pdf Restricted Access | BAB III | 415.27 kB | Adobe PDF | View/Open |
BAB IV Hasil dan Pembahasan.pdf Restricted Access | BAB IV | 314.57 kB | Adobe PDF | View/Open |
BAB V Kesimpulan dan Saran.pdf Restricted Access | BAB V | 290.83 kB | Adobe PDF | View/Open |
Cover.pdf Restricted Access | Cover | 344.43 kB | Adobe PDF | View/Open |
Daftar Pustaka.pdf Restricted Access | Daftar Pustaka | 298.6 kB | Adobe PDF | View/Open |
E12asa.pdf Restricted Access | full text | 664.15 kB | Adobe PDF | View/Open |
Lampiran.pdf Restricted Access | Lampiran | 359.52 kB | Adobe PDF | View/Open |
Ringkasan.pdf Restricted Access | Ringkasan | 288.99 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.