Please use this identifier to cite or link to this item: http://repository.ipb.ac.id/handle/123456789/109136
Title: Optimasi Suhu dan Waktu Kempa Moulding Komposit dari Bagas Sorgum dengan Perekat Berbasis Sukrosa.
Other Titles: Optimization of Pressing Temperature and Time of Composite Molding of Sweet Sorghum Bagasse with Sucrose-Based Adhesive
Authors: Hermawan, Dede
Kusumah, Sukma Surya
Santosa, Dwi Jaksana Megah
Issue Date: Sep-2021
Publisher: IPB University
Abstract: Moulding komposit yang ramah lingkungan diperlukan pada produk yang digunakan dalam kehidupan manusia sehari-hari seperti kitchen set, komponen kendaraan, bagian bangunan, dll. Oleh karena itu, bagas sorgum sebagai limbah perkebunan sorgum dan perekat asam sitrat-sukrosa merupakan salah satu sumber daya berkelanjutan yang dapat digunakan sebagai bahan baku pembuatan moulding. Akan tetapi, kondisi kempa yang optimum dalam pembuatan moulding bagas sorgum yang direkat dengan asam sitrat-sukrosa belum diketahui. Oleh karena itu, suhu dan waktu kempa optimum diselidiki. Variasi suhu dan waktu pengempaan masing-masing adalah 180, 200, 220 ºC dan 8, 10, dan 12 menit. Hasil penelitian menunjukkan bahwa kekuatan lentur dan stabilitas dimensi moulding meningkat dengan meningkatnya suhu pengempaan. Moulding dengan kondisi pengempaan panas 200 ºC dan 12 menit memiliki nilai MOE (2,86 Gpa) dan MOR (16,70 Mpa) lebih tinggi daripada kondisi pengempaan lainnya. Dengan demikian, 200 ºC dan 12 menit masing-masing adalah suhu dan waktu kempa yang optimum.
Eco-friendly moulding composite is necessary in all products which is used in daily life of human being such as kitchen set, body part of vehicle, building part, etc. Therefore, sorghum bagasse as a waste of sorghum plantation and sucrose-citric acid as one of the sustainable resources were used as raw material of the moulding. However, the optimum of pressing condition in the manufacturing of sorghum bagasse moulding bonded with sucrose-citric acid does not determine. Therefore, the optimum of pressing temperature and time were investigated. The variation of pressing temperatures and time were 180 ºC, 200 ºC, 220 ºC and 8, 10, and 12 minutes, respectively. The results showed that the bending strength and dimensional stability of the moulding increased with increasing the pressing temperature. The moulding with 200 ºC and 12 minutes of hot pressing condition has the MOE (2.86 Gpa) and MOR (16.70 Mpa) higher than those of the other pressing condition of the moulding. Thus, 200 ºC and 12 minutes were pressing temperature and time optimum, respectively.
URI: http://repository.ipb.ac.id/handle/123456789/109136
Appears in Collections:UT - Forestry Products

Files in This Item:
File Description SizeFormat 
Cover, Lembar Pengesahan, Prakata, Daftar Isi.pdf
  Restricted Access
Cover382.34 kBAdobe PDFView/Open
E24170080_Dwi Jaksana Megah Santosa.pdf
  Restricted Access
Fullteks654.72 kBAdobe PDFView/Open
Lampiran.pdf
  Restricted Access
Lampiran304.74 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.