Faktor Temperatur untuk Koreksi Sifat Mekanis Kayu
Date
2021Author
Arifa, Andini Naazhira
Bahtiar, Effendi Tri
Rahayu, Istie Sekartining
Metadata
Show full item recordAbstract
Kayu basah bertemperatur tinggi umumnya memiliki sifat mekanis lebih rendah dibandingkan kayu kering bertemperatur rendah sehingga faktor koreksi temperatur diperlukan untuk mempertimbangkan keamanan dan mengurangi resiko bahaya rubuh. Penelitian bertujuan membandingkan sifat fisis dan mekanis kayu konstruksi struktural yang digunakan pada kondisi basah atau kering serta menerima beberapa tingkat suhu. Penelitian juga menghitung nilai faktor temperatur secara empiris. Faktor temperatur didekati dengan perbandingan sifat mekanis kayu pada berbagai kondisi temperatur dan kadar air terhadap sifat mekanis kayu pada kondisi standar. Kondisi standar kayu adalah ketika kadar air berkisar 12–18% dan pada suhu ruang. Hasil penelitian menunjukkan rata-rata nilai faktor temperatur (Ct) suhu 0 ℃, 38 ℃, 45 ℃, dan 60 ℃ untuk kayu Meranti Merah yang digunakan pada kondisi kering berturut-turut adalah 1.03, 1.0, 0.88, 0.86 dan kondisi basah adalah 0.79, 0.64, 0.79, 0.68. Ct kayu Pinus pada kondisi kering rata-rata 0.91, 1.0, 0.95, 0.97 dan kondisi basah adalah 1.07, 0.81, 0.77, 0.87. Nilai Ct penelitian menghasilkan nilai yang bervariasi dibandingkan SNI 7973:2013. Nilai Ct yang lebih kecil dibanding SNI memungkinkan terjadinya bahaya rubuh, sedangkan nilai Ct yang besar lebih konservatif. Woods in high temperature and wet condition generally has lower mechanical properties than woods with lower temperature and dry conditions. Temperature factor is needed to consider safety and to reduce the risk of collapse. This research objective is to compare timber’s physical and mechanical properties in a wet or dry environment and receive several temperature levels. This research also empirically measures the temperature factor, approximated by the ratio of the mechanical properties of wood at various temperatures and moisture content to that of standard conditions. Standard conditions are when the moisture content is 12–18% at room temperature. This research result shows that the average value of temperature factor in 0 ℃, 38 ℃, 45 ℃, and 60 ℃ for Red Meranti used in dry condition consecutively are 1.03, 1.0, 0.88, 0.86 and in wet conditions 0.79, 0.64, 0.79, 0.68. The average Pine wood’s Ct in dry condition are 0.91, 1.0, 0.95, 0.97, and in wet condition are 1.07, 0.81, 0.77, 0.87. The Ct values in this research a greater or lower compared to SNI 7973:2013. The lower Ct value indicates a higher possibility of collapsing, while the higher Ct value means conservative.
Collections
- UT - Forest Products [2184]