dc.contributor.advisor | Maddu, Akhiruddin | |
dc.contributor.advisor | Indro, M. Nur | |
dc.contributor.author | Gusra, Haqqi | |
dc.date.accessioned | 2013-04-17T02:36:13Z | |
dc.date.available | 2013-04-17T02:36:13Z | |
dc.date.issued | 2013 | |
dc.identifier.uri | http://repository.ipb.ac.id/handle/123456789/62440 | |
dc.description.abstract | photoelectrochemical solid cell in ITO/CdS/Electrolyte/ITO structure has been succesfully composed through this research. The photoelectrochemical cell material is a layer of cadmium sulfide deposited onto an ITO-covering glass substrate. The CdS layer is used as a working electrode of the cell. The solid electrolyte used is a combination of chitosan-PEG-KI/I2. The concentration of KI/I2 was varied from 0.1/0.01 M to 0.5/0.05 M. The current-voltage output of the cell was measured under a light illumination of a tungsten lamp and the sun. The output voltage found increases around 50% when the KI/I2 consentration was raised from 0.1/0.01 M to 0.5/0.05 M. When the radiation intensity increased from 1.074 mW/m2 to 4.147 mW/m2, Voc voltage increased around threefold, Isc current increased around twice, and power efficiency increased around twice at a fixed concentration. The highest efficiency of the solar cells (on singlecell measurements) obtained at the concentrations of 0.5/0.05 M KI/I2. In a circuit consist of 4 solar cells, the highest power eficiency and FF produced by the serial circuit. | en |
dc.subject | Bogor Agricultural University (IPB) | en |
dc.subject | efficiency | en |
dc.subject | KI-I2 | en |
dc.subject | chitosan | en |
dc.subject | CdS | en |
dc.subject | photoelectrochemical solid cel | en |
dc.title | Pembuatan Sel Fotoelektrokimia Padat dengan Struktur ITO/CdS/Elektrolit/ITO | en |