Show simple item record

dc.contributor.advisorRafi, Mohamad
dc.contributor.advisorArif, Zulhan
dc.contributor.authorSujana, Anike Arliana
dc.date.accessioned2015-08-13T06:35:03Z
dc.date.available2015-08-13T06:35:03Z
dc.date.issued2015
dc.identifier.urihttp://repository.ipb.ac.id/handle/123456789/76025
dc.description.abstractHighly concentration of nitrate in environment especially in water can cause health issue. Therefore, nitrate level should be monitored periodically. The presence of nitrate in the water could be detected by ion-selective electrode (ISE) made of coated a wire electrode using polymeric membrane. The objectives of this research are to determine the optimum time of membrane coating and analytical performance of the ISE. The membranes used in this study were composed of, 35% PVC, 61% plasticizer, and 4% aliquot of 336-nitrate with various coating time of 10, 15, 20, 25, and 30 seconds. Based on the results, the optimum time of membrane coating was 20 seconds. ISE III showed the best Nernst factor of 59.70 mV/decade. The best Nernstian response was in concentration range of 10-4–10-1 M. The response time of the developed nitrate ISE was less than 1 minute. The detection limit was found to be 6.14  10-5 M. The developed nitrate ISE did not show interference by NO2 - ion, but encountered interference by the presence of CH3COO-, ClO4 -, H2PO4 -, and SO4 2- ionsen
dc.language.isoid
dc.subject.ddcion selectivesen
dc.subject.ddcChemistryen
dc.titlePengoptimuman waktu penyalutan membran PVC dalam pembuatan elektrode selektif ion nitraten
dc.subject.keywordBogor Agricultural University (IPB)en
dc.subject.keywordPVC membraneen
dc.subject.keywordnitrateen
dc.subject.keywordion selective electrodeen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record